€ 
€ 
DEV-KIT-COMe-T6
Usually ships in 2-4 days
Compatible with both x86 and Arm COM Express® Type 6 modules.
Available
$1,539.00
excl. TAX/VAT/SHIPPING
DEV-KIT-COMe-T6
| Video Interfaces | 3 x DP++ connector VGA connector LVDS 24-bit Single/ Dual Channel eDP 4-lanes 40 poles VESA connector LVDS External EDID flash socket |
|---|---|
| Mass Storage | 4 x SATA 7p M connectors μSD Card slot (interface multiplexed with GPIO header) |
| Networking | 1x GbEthernet RJ-45 connector |
| Usb | 4x USB 3.1 Host ports on Type-A sockets 4 x USB 2.0 Host ports on Quad Type-A sockets |
| Audio | On-board HD Audio Codec (Realtek ALC888S) HD Audio Jacks S/PDIF Out Optical connector Mic In + Line Out internal pin header |
| Serial Ports | 2 x RS-232 / RS-422 / RS-485 ports on internal pin header (from carrier board’s LPC Dual UART controller) 2 x RS-232 ports on dedicated pin header (from module) |
| Other Interfaces | 2x PCI-e x4 Slots 1x PCI-e x16 Slot 4 x GPI + 4 x GPO pin header (interface multiplexed with µSD slot) SPI Flash header Button / LEDs front panel header 4-pin tachometric FAN connector I2C + SM Bus on feature Pin header FuSa Header I2C Flash Socket JTAG connector LPC internal header USB overcurrent header SM Bus Smart Battery Connector 4 x 7-segment LCD displays for POST codes LPC/eSPI internal header |
| Power Supply | ATX 24 poles connector for carrier board working only Auxiliary 12V connector for carrier board working only 12 VDC power in connector for COM Express module’s working Cabled Coin-cell connector for RTC |
| Dimensions | 305x244mm (ATXform factor, 12” x 9.6”) |
| Operating Temperature | 0°C ÷ +60°C ** (Commercial version) **All carrier board components must remain within the operating temperature at any and all times, including start-up; carrier operating temperature is independent of the module installed. Please refer to the specific module for more details. Actual temperature will widely depend on application, enclosure and/or environment. Upon customer to consider specific cooling solutions for the final system |
View all specs
View less specs
| Video Interfaces | 3 x DP++ connector VGA connector LVDS 24-bit Single/ Dual Channel eDP 4-lanes 40 poles VESA connector LVDS External EDID flash socket |
|---|---|
| Mass Storage | 4 x SATA 7p M connectors μSD Card slot (interface multiplexed with GPIO header) |
| Networking | 1x GbEthernet RJ-45 connector |
| Usb | 4x USB 3.1 Host ports on Type-A sockets 4 x USB 2.0 Host ports on Quad Type-A sockets |
| Audio | On-board HD Audio Codec (Realtek ALC888S) HD Audio Jacks S/PDIF Out Optical connector Mic In + Line Out internal pin header |
| Serial Ports | 2 x RS-232 / RS-422 / RS-485 ports on internal pin header (from carrier board’s LPC Dual UART controller) 2 x RS-232 ports on dedicated pin header (from module) |
| Other Interfaces | 2x PCI-e x4 Slots 1x PCI-e x16 Slot 4 x GPI + 4 x GPO pin header (interface multiplexed with µSD slot) SPI Flash header Button / LEDs front panel header 4-pin tachometric FAN connector I2C + SM Bus on feature Pin header FuSa Header I2C Flash Socket JTAG connector LPC internal header USB overcurrent header SM Bus Smart Battery Connector 4 x 7-segment LCD displays for POST codes LPC/eSPI internal header |
| Power Supply | ATX 24 poles connector for carrier board working only Auxiliary 12V connector for carrier board working only 12 VDC power in connector for COM Express module’s working Cabled Coin-cell connector for RTC |
| Dimensions | 305x244mm (ATXform factor, 12” x 9.6”) |
| Operating Temperature | 0°C ÷ +60°C ** (Commercial version) **All carrier board components must remain within the operating temperature at any and all times, including start-up; carrier operating temperature is independent of the module installed. Please refer to the specific module for more details. Actual temperature will widely depend on application, enclosure and/or environment. Upon customer to consider specific cooling solutions for the final system |
View all specs
View less specs
The Development Kit contains the following material: - CCOMe-C96 Carrier Board - GPIO Header adapter cable (Free wires on one extremity) - 2x Serial Adapter Cables - 1x certified High Speed DP cable 1m - DP-to-HDMI adapter - 1x SATA cable - HDMI cable - eDP cable - Front Panel module V995 with connecting cables Module not included. Must be purchased separately.
Part Number: KTDV-COME6-C96.00
Part Number: KTDV-COME6-C96.00
