Accessories

essentials

UDOO GROVE STARTER KIT

$60.35

With this Kit you'll have all the Sensors you want to develop and realize all your ideas.

CASE FOR NEO

$8.50

The plastic case for your UDOO NEO board.

LIGHT SENSOR KIT

$6.50

Use this Light Sensor Brick to augment your UDOO boards and make them more versatile.

POWER SUPPLY 12V 3A EU

$10.95

Not available

AC Power Supply Adapter DC 12 Volt 3 Amp

POWER SUPPLY 12V 3A USA

$10.95

Not available

AC Power Supply Adapter DC 12 Volt 3 Amp

must-haves

7INCH HDMI/USB DISPLAY/TOUCH

$81.50

The wonderful 7inch HDMI/USB Display/Touch with 1024×600 high resolution.

USB KIT

$4.80

Not available

This Kit contain a Micro USB to USB OTG Host Adapter + Micro-USB to USB Cable (50cm)

USB/SERIAL DEBUG MODULE FOR NEO

$3.00

The USB/Serial debug module you can use only with your UDOO NEO

cables

MICRO HDMI TO HDMI CABLE

$4.15

The Micro HDMI to HDMI cable for NEO.

sensors

BAROMETER ALTIMETER TEMPERATURE KIT

$4.50

Use this Barometric/Altimeter/Temperature Sensor Brick to augment your UDOO boards and make them more versatile.

TEMPERATURE SENSOR KIT

$3.90

Use this Temperature Sensor Brick to augment your UDOO boards and make them more versatile.

HUMIDITY SENSOR KIT

$10.90

Not available

Use this Humidity Sensor Brick to augment your UDOO boards and make them more versatile.

GESTURE SENSOR KIT

$15.00

Use this Gesture Sensor Brick to augment your UDOO boards and make them more versatile.

$39.00

UDOO NEO BASIC

Estimated delivery time: 2-5 working days after payment confirmation

Total:

Item(s) selected:

Skip to the end of the images gallery

Skip to the beginning of the images gallery

UDOO NEO BASIC

Usually ships in 2-4 days

Buy UDOO NEO BASIC from our Official Distributors:
- Mouser
- Digikey

Available

Quantity:

Special Price $39.00 Regular Price $65.00 excl. TAX/VAT/SHIPPING

More Information
CPU	NXP™ i.MX 6SoloX applications processor with an embedded ARM Cortex-A9 core. Cortex-M4 Core
Graphics	Vivante GC420 Integrated 2D/3D graphics accelerator
Connectivity	MicroSD card slot onboard. 8-bit SDIO interface
Memory	RAM 512MB

UDOO NEO BASIC

Full Specs

More Information
Processor	NXP™ i.MX 6SoloX applications processor with an embedded ARM Cortex-A9 core and a Cortex-M4 Core
Memory	DDR3 512MB
Graphics	Vivante GC420 Integrated 2D/3D graphics controller
Video Interfaces	Micro HDMI interface - LVDS interface + touch (I2C signals) Analog camera connection supporting NTSC and PAL 8-bit parallel camera interface*
Mass Storage	MicroSD card slot onboard 8-bit SDIO interface*
Networking	Fast ethernet RJ45 – 10/100Mbps
Usb	1x USB 2.0 Type A ports 1x USB OTG (micro-AB connector)
Audio	HDMI audio transmitter S/PIDF & I2S*
Serial Ports	3x UART ports* 2x CAN Bus interfaces*
Other Interfaces	8x PWM signals* 3x I2C interface* 1x SPI interface* 6x multiplexable signals*
Digital IO pins	32 extended GPIOs (A9 dedicated) 22 arduino GPIOs (M4 dedicated)
Leds	1x Green Power Status LED 2x User Configurable LEDs (Red and Orange)
Integrated Sensors	1x Sensors Snap-in I2C connector
Power Supply	1x DC Micro USB 5V 1x DC Power Jack 6-15V 1x RTC Battery Connector
Operating System	Linux UDOObuntu2 (14.04 LTS) Android Marshmallow 6.0.1
Dimensions	89mm x 59mm - 3.50 inch x 2.32 inch
Arduino Pinout	Arduino-compatible through the standard Arduino Uno layout and compatible with Arduino shields.
Digital Pins	32 extended GPIOs (A9 dedicated) 22 Arduino GPIOs (M4 dedicated)
Analog Pins	6 available Pins
Campo Note	*Available on Pin Header

View all specs

View less specs

Full Specs

More Information
Processor	NXP™ i.MX 6SoloX applications processor with an embedded ARM Cortex-A9 core and a Cortex-M4 Core
Memory	DDR3 512MB
Graphics	Vivante GC420 Integrated 2D/3D graphics controller
Video Interfaces	Micro HDMI interface - LVDS interface + touch (I2C signals) Analog camera connection supporting NTSC and PAL 8-bit parallel camera interface*
Mass Storage	MicroSD card slot onboard 8-bit SDIO interface*
Networking	Fast ethernet RJ45 – 10/100Mbps
Usb	1x USB 2.0 Type A ports 1x USB OTG (micro-AB connector)
Audio	HDMI audio transmitter S/PIDF & I2S*
Serial Ports	3x UART ports* 2x CAN Bus interfaces*
Other Interfaces	8x PWM signals* 3x I2C interface* 1x SPI interface* 6x multiplexable signals*
Digital IO pins	32 extended GPIOs (A9 dedicated) 22 arduino GPIOs (M4 dedicated)
Leds	1x Green Power Status LED 2x User Configurable LEDs (Red and Orange)
Integrated Sensors	1x Sensors Snap-in I2C connector
Power Supply	1x DC Micro USB 5V 1x DC Power Jack 6-15V 1x RTC Battery Connector
Operating System	Linux UDOObuntu2 (14.04 LTS) Android Marshmallow 6.0.1
Dimensions	89mm x 59mm - 3.50 inch x 2.32 inch
Arduino Pinout	Arduino-compatible through the standard Arduino Uno layout and compatible with Arduino shields.
Digital Pins	32 extended GPIOs (A9 dedicated) 22 Arduino GPIOs (M4 dedicated)
Analog Pins	6 available Pins
Campo Note	*Available on Pin Header

View all specs

View less specs

The most energy-efficient UDOO NEO for your IoT embedded system.

UDOO NEO BASIC is the perfect solution for low power consumption embedded systems.

You can use it as a Headless Device, exploiting USB and Ethernet ports. The board is compatible with most Arduino shields, sensors and actuators. UDOO NEO BASICis also compatible with UDOO Bricks: programmable modules, like the temperature sensor and the barometric sensor, that you can add to make UDOO NEO BASIC even more versatile.

UDOO NEO BASIC can be powered in three ways. You can use:

- A standard 12 volts power supply, we recommend this one;
- A Micro USB cable like the one we have in our USB Kit;
- Any USB battery pack available on the market.

List of Components:

- 1x UDOO NEO BASIC

You can check out our Kickstarter Campaign.