€
€ 
KIT M.2 WIFI/BT
Usually ships in 2-4 days
The Wifi Kit contains an M.2 Wi-Fi Intel dual band ac Wi-Fi + BT 4.2 5ghz + 2 adhesive antennas.
Available
€20.85
excl. TAX/VAT/SHIPPING
KIT M.2 WIFI/BT
View all specs
View less specs
View all specs
View less specs
M.2 Wi-Fi Intel dual band ac Wi-Fi + BT 4.2 5ghz + antenna adhesive
Intel® Dual Band Wireless Wi-Fi kit w/ 3168.NGWG AC and BT 4.2 module
Dimensions: 4.9 x 3.5 x 0.4 inches
Weight: 8.5g (0.3 oz)
For more info about this WiFi/BT module you can check the datasheet from the Intel website.
Intel® Dual Band Wireless Wi-Fi AC and BT 4.2 module (Intel® AC3168) was released in 2016 so we suggest to use a recent distribution to find the latest drivers already installed. If you are using a Linux distribution you need at least the v4.6 of the Linux Kernel to make this module work properly.
You need both the antennas to make the module work properly. Connect an antenna to the Main A connector to enhance Wi-Fi signal. Connect an antenna to the Aux B connector to enhance BT and BT LE signal.
Screws/Spacers NOT included. The screws/Spacers are included only buying a UDOO X86 Board. The required Screws/Spacers are the following:
M3x8mm Flat head Screw;
2mm Round Spacer;
0.5mm Flat washers;
M3 Hex Nut.
Buy NOW the Screws and spacers kit for M.2 accessories mounting.
For more info visit our Docs X86.
List of Components:
1x M.2 Wi-Fi Intel dual band ac Wi-Fi + BT 4.2 5ghz module
2x Antennas: MHF4 connector, 10cm IPEX cable, Adhesive backing on aerial plates.
Intel® Dual Band Wireless Wi-Fi kit w/ 3168.NGWG AC and BT 4.2 module
Dimensions: 4.9 x 3.5 x 0.4 inches
Weight: 8.5g (0.3 oz)
For more info about this WiFi/BT module you can check the datasheet from the Intel website.
Intel® Dual Band Wireless Wi-Fi AC and BT 4.2 module (Intel® AC3168) was released in 2016 so we suggest to use a recent distribution to find the latest drivers already installed. If you are using a Linux distribution you need at least the v4.6 of the Linux Kernel to make this module work properly.
You need both the antennas to make the module work properly. Connect an antenna to the Main A connector to enhance Wi-Fi signal. Connect an antenna to the Aux B connector to enhance BT and BT LE signal.
Screws/Spacers NOT included. The screws/Spacers are included only buying a UDOO X86 Board. The required Screws/Spacers are the following:
M3x8mm Flat head Screw;
2mm Round Spacer;
0.5mm Flat washers;
M3 Hex Nut.
Buy NOW the Screws and spacers kit for M.2 accessories mounting.
For more info visit our Docs X86.
List of Components:
1x M.2 Wi-Fi Intel dual band ac Wi-Fi + BT 4.2 5ghz module
2x Antennas: MHF4 connector, 10cm IPEX cable, Adhesive backing on aerial plates.
