CARRIER-Q7-D03
Solitamente spedito in 2-4 giorni
For Qseven® and μQseven® Rev 2.1 Modules.
Disponibile
99,75 €
escl. IVA/SPEDIZIONE
CARRIER-Q7-D03
Interfacce Video | LVDS Dual Channel 24-bit + backlight connector HDMI® connector |
---|---|
Memoria Di Massa | microSD Slot |
Rete | 1 x Gigabit Ethernet connectors 1 x Mini-PCIe Slot for WWAN Modem Modules, connected to on-board microSIM slot |
Usb | 1 x USB 2.0 Host port on Type-A socket 1 x USB 3.0 Host ports on Type-A socket shared with USB 2.0 OTG Client 1 x USB 2.0 OTG port on micro-AB socket shared with USB 3.0 Host 1 x USB 2.0 Host port on internal connector 1 x USB 2.0 Host port on M.2 Socket 1 KeyE Slot 1 x USB 2.0 Host port on mini-PCIe Slot |
Audio | Optional combo TRSS audio connector Mic in/Stereo out |
Porte Seriali | Optional 4-wires RS-232 / RS-422 / RS-485 configurable serial port on pin header |
Altre Interfacce | 1 x PCIe x1 lane on M.2 Socket 1 Key E Slot 1 x PCIe x1 lane on Mini-PCIe Slot Optional 1 x CAN port on pin header 1 x PCIe x1 lane on M.2 Socket 1 Key E Slot 1 x PCIe x1 lane on Mini-PCIe Slot 1 x 40 pin connector for I2C, SPI and General Purpose I/O, pinout compatible with the Raspberry Pi - GPIO Connector 1 x LED driver connector 4-wires FAN connector configurable microSIM Slot for miniPCIe Modem Debug USB port on micro-AB socket MFG connector for JTAG programming of Qseven® module |
Alimentazione | 12VDC through USB Type-C connector Coin cell battery Holder for CMOS and RTC |
Dimensioni | embedded NUC™ compliant: 101.6 x101.6 mm (4”x4”) |
Operating Temperature | 0°C ÷ +70°C * *All carrier board components must remain within the operating temperature at any and all times, including start-up; carrier operating temperature is independent of the module installed. Please refer to the specific module for more details. Actual temperature will widely depend on application, enclosure and/or environment. Upon customer to consider specific cooling solutions for the final system. |
Visualizza tutte le specifiche
Visualizza meno specifiche
Interfacce Video | LVDS Dual Channel 24-bit + backlight connector HDMI® connector |
---|---|
Memoria Di Massa | microSD Slot |
Rete | 1 x Gigabit Ethernet connectors 1 x Mini-PCIe Slot for WWAN Modem Modules, connected to on-board microSIM slot |
Usb | 1 x USB 2.0 Host port on Type-A socket 1 x USB 3.0 Host ports on Type-A socket shared with USB 2.0 OTG Client 1 x USB 2.0 OTG port on micro-AB socket shared with USB 3.0 Host 1 x USB 2.0 Host port on internal connector 1 x USB 2.0 Host port on M.2 Socket 1 KeyE Slot 1 x USB 2.0 Host port on mini-PCIe Slot |
Audio | Optional combo TRSS audio connector Mic in/Stereo out |
Porte Seriali | Optional 4-wires RS-232 / RS-422 / RS-485 configurable serial port on pin header |
Altre Interfacce | 1 x PCIe x1 lane on M.2 Socket 1 Key E Slot 1 x PCIe x1 lane on Mini-PCIe Slot Optional 1 x CAN port on pin header 1 x PCIe x1 lane on M.2 Socket 1 Key E Slot 1 x PCIe x1 lane on Mini-PCIe Slot 1 x 40 pin connector for I2C, SPI and General Purpose I/O, pinout compatible with the Raspberry Pi - GPIO Connector 1 x LED driver connector 4-wires FAN connector configurable microSIM Slot for miniPCIe Modem Debug USB port on micro-AB socket MFG connector for JTAG programming of Qseven® module |
Alimentazione | 12VDC through USB Type-C connector Coin cell battery Holder for CMOS and RTC |
Dimensioni | embedded NUC™ compliant: 101.6 x101.6 mm (4”x4”) |
Operating Temperature | 0°C ÷ +70°C * *All carrier board components must remain within the operating temperature at any and all times, including start-up; carrier operating temperature is independent of the module installed. Please refer to the specific module for more details. Actual temperature will widely depend on application, enclosure and/or environment. Upon customer to consider specific cooling solutions for the final system. |
Visualizza tutte le specifiche
Visualizza meno specifiche
Carrier Board for Qseven® and μQseven® Rev 2.1 Modules in embedded NUC™ Form factor
Part Number: QD03-0001-2111-C1
Part Number: QD03-0001-2111-C1