Accessori

SBC-3.5-MX8M-MINI HEAT SINK

11,20 €

Heat Sink passivo.

169,60 €

SBC-3.5-MX8M-MINI QUAD 2GB

Tempi di consegna stimati: 2-5 giorni lavorativi successivi alla conferma del pagamento

Totale:

Prodotti selezionati:

Vai alla fine della galleria di immagini

Vai all'inizio della galleria di immagini

SBC-3.5-MX8M-MINI QUAD 2GB

Solitamente spedito in 2-4 giorni

Con NXP i.MX 8M Mini Quad Processor.

Disponibile

Quantità:

169,60 € escl. IVA/SPEDIZIONE

Maggiori Informazioni
CPU	i.MX8M Mini Quad 4x Cortex®-A53 cores up to 1.8GHz
Graphics	GC320 2D accelerator + GCNanoUltra 3D accelerator Embedded VPU (not for Lite processors), able to offer: VP9, HEVC/H.265, AVC/H.264, VP8 HW Decoding AVC/H.264, VP8 HW encoding OpenGL ES 2.0, OpenVG 1.1 support
Connectivity	2x GbEthernet interfaces (1 optional) Optional shielded ultra-small dual Band WiFi 802.11 a/b/g/n/ac with BT 5.0 module onboard Optional soldered on-board LTE Cat 4 Modem with SIM slot or Telenor eSIM with 5MB Bundle
Memory	Soldered-down 2GB LPDDR4 32-bit interface

SBC-3.5-MX8M-MINI QUAD 2GB

Specifiche

Maggiori Informazioni
Processore	i.MX8M Mini Quad 4x Cortex®-A53 cores up to 1.8GHz
Core	4+1
Memoria	Soldered-down 2GB LPDDR4 32-bit interface
Scheda Grafica	GC320 2D accelerator + GCNanoUltra 3D accelerator Embedded VPU (not for Lite processors), able to offer: VP9, HEVC/H.265, AVC/H.264, VP8 HW Decoding AVC/H.264, VP8 HW encoding OpenGL ES 2.0, OpenVG 1.1 support
Interfacce Video	LVDS Single/Dual Channel connector or eDP connector (factory alternatives) MIPI-CSI Camera interface connector Up to 1920x1080p60, 24bpp
Memoria Di Massa	Optional eMMC 5.1 drive on-board, up to 64GB MicroSD slot 2Kb I2C Flash QSPI Flash
Rete	2x GbEthernet interfaces (1 optional) Optional shielded ultra-small dual Band WiFi 802.11 a/b/g/n/ac with BT 5.0 module onboard Optional soldered on-board LTE Cat 4 Modem with SIM slot or Telenor eSIM with 5MB Bundle
Usb	2x USB 2.0 Host ports on Type-A socket 2x USB 2.0 Host ports on internal pin header 1x USB Host or client port on micro-AB connector (interface shared with the optional on-board modem)
Audio	Digital Mic In connector (2x PDM inputs) Amplified mono Speaker Output
Porte Seriali	Up to 2x RS-232 or RS-485 or CAN Serial ports (factory options, shared with GPIOs and SPI interfaces) 2x Debug UARTS
Altre Interfacce	I/O Connectors with: • 2xPWM @3.3V • GP I2C interface @3.3V • 1x Open Drain output (max 12V, 250mA) • 2x GPIOs @3.3V • 1xRS-232 or 1x RS-485 or 4x GPIOs / 1x UART or 1x CAN (factory options) • 1xRS-232 or 1x RS-485 or 4x GPIOs / 1x UART or 1x CAN + on-board ultra-low power RTC (factory options) Watchdog Dedicated connector for I2C Touch Screen Controller Support Onboard Buzzer (Comm. temp. range only) Optional Ultra Low Power RTC
Alimentazione	+12VDC÷ +24VDC
Sistema Operativo	Yocto Android (planned)
Dimensioni	146x102 mm (3.5" form factor)
Operating Temperature	0°C ÷ +60°C (extended version) -40°C ÷ +85°C (industrial version, limited to -30°C ÷ +85°C with WiFi/BT module on-board) *Measured at any point of SECO standard heatsink for this product, during any and all times (including start-up). Actual temperature will widely depend on application, enclosure and/or environment. Upon customer to consider application-specific cooling solutions for the final system to keep the heatspreader temperature in the range indicated.

Visualizza tutte le specifiche

Visualizza meno specifiche

Specifiche

Maggiori Informazioni
Processore	i.MX8M Mini Quad 4x Cortex®-A53 cores up to 1.8GHz
Core	4+1
Memoria	Soldered-down 2GB LPDDR4 32-bit interface
Scheda Grafica	GC320 2D accelerator + GCNanoUltra 3D accelerator Embedded VPU (not for Lite processors), able to offer: VP9, HEVC/H.265, AVC/H.264, VP8 HW Decoding AVC/H.264, VP8 HW encoding OpenGL ES 2.0, OpenVG 1.1 support
Interfacce Video	LVDS Single/Dual Channel connector or eDP connector (factory alternatives) MIPI-CSI Camera interface connector Up to 1920x1080p60, 24bpp
Memoria Di Massa	Optional eMMC 5.1 drive on-board, up to 64GB MicroSD slot 2Kb I2C Flash QSPI Flash
Rete	2x GbEthernet interfaces (1 optional) Optional shielded ultra-small dual Band WiFi 802.11 a/b/g/n/ac with BT 5.0 module onboard Optional soldered on-board LTE Cat 4 Modem with SIM slot or Telenor eSIM with 5MB Bundle
Usb	2x USB 2.0 Host ports on Type-A socket 2x USB 2.0 Host ports on internal pin header 1x USB Host or client port on micro-AB connector (interface shared with the optional on-board modem)
Audio	Digital Mic In connector (2x PDM inputs) Amplified mono Speaker Output
Porte Seriali	Up to 2x RS-232 or RS-485 or CAN Serial ports (factory options, shared with GPIOs and SPI interfaces) 2x Debug UARTS
Altre Interfacce	I/O Connectors with: • 2xPWM @3.3V • GP I2C interface @3.3V • 1x Open Drain output (max 12V, 250mA) • 2x GPIOs @3.3V • 1xRS-232 or 1x RS-485 or 4x GPIOs / 1x UART or 1x CAN (factory options) • 1xRS-232 or 1x RS-485 or 4x GPIOs / 1x UART or 1x CAN + on-board ultra-low power RTC (factory options) Watchdog Dedicated connector for I2C Touch Screen Controller Support Onboard Buzzer (Comm. temp. range only) Optional Ultra Low Power RTC
Alimentazione	+12VDC÷ +24VDC
Sistema Operativo	Yocto Android (planned)
Dimensioni	146x102 mm (3.5" form factor)
Operating Temperature	0°C ÷ +60°C (extended version) -40°C ÷ +85°C (industrial version, limited to -30°C ÷ +85°C with WiFi/BT module on-board) *Measured at any point of SECO standard heatsink for this product, during any and all times (including start-up). Actual temperature will widely depend on application, enclosure and/or environment. Upon customer to consider application-specific cooling solutions for the final system to keep the heatspreader temperature in the range indicated.